We have in sale the following types of PVC

1. TP. Thermoplastic for production of articles for technical purposes.
2. 0-50�0-65 for electro-cable coating.
3. MPE � high range of flexibility, protectiveness for cables covering, impermeable to oil.
4. PVC cashing for shoe soles.

• Used for households, in hot culture (hot beds covering), in order to heat The Soil, for preventing weeds growing or as a protection of fidders from precipitation, used for making plastic sacs & bags, in medicine used as bandage � cloths materials, etc
• Temperature range of exploitation from �50° C to +40° C.

• Used in electro-insulation, chemo-insulation, and radio-insulation.
• Exploitation temperature range from �15° C to +70° C
• Resistant to rupture Mpa (kgs/cm²) not less then 13.2 (135)
• Elasticity in % not less then 230
• Storage period 3 years

• Used as material for padding, lining with equipment meant for work in aggressive conditions and also as a floor covering in subsidiary premises (instead of linoleum)
• Resistant to acids and alkali
• Welding by hot air
• Low range of electro-condactivity
• Interaction with oil forbidden

• Used for electro-insulating of wires & cables at repair & connection of electro-cables with nonmetal shells which work at static temperature of �50° C to +70° C
• Type 70 is used for automobiles and in households
• For corrosion protection TU-6-06-5761799-002-88E is a good means of winding of gas-oil lines, and other pipe-lines
• Temperature range of exploitation at static conditions is from �30° C to +55° C. Protective coating is realized at t° C not less than +5° C

• Used for insulation of wires meant for work at temperature range of �60° C to +70° C
• Specific volumetric resistance at 20° C not less then 5× 10¹³ ohm.cm, at 70° C not less then 1× 10¹¹ ohm.cm
• Elasticity not less then 19× 6MPa
• Resistance to rupture is not less then 250%
• Brittleness temperature not more then �40° C

These are used for plastification of vinyl pitches and other kind of polymers in manufacturing electro-cable tapes, artificial leather, technical synthetical rubber articles, polymeric building materials, linoleum, plastic sheets, polymeric films, PVC films, PVC washers (padding, gaskets, packing) for refrigerators, as ingredients of lubricating oils and hydrolic liquid (DOS & DOS-thermostable).

Main types:

• CO � condenser, for production of condensers;
• EO � electro-insulation, specific.

• Exploitation temperature range from �269° C to +260° C
• Resistance to rupture not less then 43,1 � 50 MPa
• Elasticity not less then 55 � 53 %
• Electrotensile strength at a constant voltage not less then 255 � 160 mV/m
• Specific volumetric, electro-resistance not less then 1× 10¹⁵ Ohm× m
• Dielectric penetrability at a frequency of 1 MG 2,0 ± 0,15

• EN � electro-insulating, non-specific
• IO � insulating, specific
• IN � insulating, non-specific
• Condenser type, specific, normalized
• F-4NEO, F-4MEN � electro-insulating, modified of PTFE-FT-4

Back to the general list